JeNo 7″ V1.1.1
Une vraie conception 7", pas un 5" étiré. Bottom plate 3 mm, bras au choix 6 mm renforcés ou 8 mm pleine matière, géométrie Wide-X. Pensé pour le long range, le cinematic et le freeride exigeant.
Un vrai 7", conçu comme tel
La plupart des frames "7 pouces" sont des 5" étirés. Le JeNo 7 a été redessiné de zéro : géométrie recalculée, bras repensés avec choix entre 6 mm renforcé ou 8 mm pleine matière, zone batterie généreuse (+140 mm), stack décentralisé. Rigidité accrue pour tenir la longue distance et le cinematic sans vibrations. Version V1.1.1 avec support DJI O4 Pro natif.
Conçu par WE are FPV
Open-source community · Designed in France4 terrains où le 7" excelle
Long range
Le format 7" est roi sur la distance. Portance élevée, consommation maîtrisée, le JeNo va loin et revient.
Cinematic
Plans larges, travellings fluides. Cam plates Cinematic 25° ou 40° souples pour une vidéo stabilisée pixel-near.
Freeride
Campagnes, montagnes, drift entre les arbres. La stabilité du 7" rend le pilotage long relax et précis.
Éditions et options disponibles
| Bras | Épaisseur | Profil | Usage |
|---|---|---|---|
| 6 mm renforcés | 6 mm + 4 mm | Légèrement plus léger | LR orienté efficacité |
| 8 mm pleine matière | 8 mm | Rigidité maximale | Cinematic, crash-proof |
Cam plates disponibles : Classic 25° (freestyle), High-tilt 40° (LR agressif), Cinematic "Wide" 25° (montage dur ou soft), Cinematic "Wide" 40° pour les LR stabilisés.
Éditions frame : Classic (polyvalent), Light (race LR), Bando (renforcé impact).
Spécifications techniques
| Taille hélices | 7" |
| Géométrie | Wide-X, cam cage inclinable |
| Poids nu | 248-260 g (selon config) |
| Bottom plate | 3 mm |
| Arms | 6 mm + 4 mm ou 8 mm pleine |
| Body height | 30 mm |
| Stack height | 19.5 → 21.5 mm |
| Stack principal | 30×30 mm (M3) ou 20×20 mm (M3) |
| Stack arrière | 20×20 mm ou 25.5×25.5 mm |
| Montage moteurs | 16 mm / 19 mm |
| Cells batterie | 4S → 6S+ |
| Zone batterie | +140 mm (grandes capacités) |
| Cam mounting | DJI 20 mm · Micro · Nano |
| Cam tilt | 0° → 40° réglable |
| Version design | V1.1.1 (support O4 Pro) |
Pièces TPU disponibles
Kit TPU officiel du JeNo 7 (fichiers STL fournis) :
- •Support antenne DJI O3
- •Support double antenne SMA
- •Support condo 50V + spike absorber
- •Bumper arrière + fixation antenne RX
- •Support antenne RX avant
- •Protection bras avec patin (6 mm + 8 mm)
STL dispos sur Printables. Remixes community disponibles : JeNo 7 BBL (RanxFPV), Freestyle Bash Edition, sets TPU complets par Jean-Lil et BinaryWhite.
Ressources
Projet open-source documenté. Fichiers carbone, PDF montage, reviews :
A genuine 7" design, not a scaled-up 5". 3mm bottom plate, 6mm reinforced or 8mm solid arms of your choice, Wide-X geometry. Built for long range, cinematic and demanding freeride.
A real 7", designed as such
Most "7-inch" frames on the market are stretched 5"s. The JeNo 7 was redrawn from scratch: recalculated geometry, redesigned arms with a choice between 6mm reinforced or 8mm solid, generous battery zone (+140mm), decentralized stack. Increased rigidity to hold long distance and cinematic shots without vibration. Version V1.1.1 with native DJI O4 Pro support.
Designed by WE are FPV
Open-source community · Designed in France4 playgrounds where the 7" excels
Long range
The 7" format is king for distance. High lift, controlled consumption — the JeNo goes far and brings you home.
Cinematic
Wide shots, flowing dolly moves. Cinematic 25° or 40° soft cam plates for near-pixel-perfect stabilized video.
Freeride
Countryside, mountains, drifting through trees. The stability of the 7" makes long flights relaxed and precise.
Editions and options available
| Arms | Thickness | Profile | Usage |
|---|---|---|---|
| 6mm reinforced | 6 mm + 4 mm | Slightly lighter | Efficiency-focused LR |
| 8mm solid | 8 mm | Maximum rigidity | Cinematic, crash-proof |
Available cam plates: Classic 25° (freestyle), High-tilt 40° (aggressive LR), Cinematic "Wide" 25° (hard or soft mount), Cinematic "Wide" 40° for stabilized LR.
Frame editions: Classic (all-round), Light (LR race), Bando (impact-reinforced).
Technical specifications
| Prop size | 7" |
| Geometry | Wide-X, tiltable cam cage |
| Bare weight | 248-260 g (depending on config) |
| Bottom plate | 3 mm |
| Arms | 6 mm + 4 mm or 8 mm solid |
| Body height | 30 mm |
| Stack height | 19.5 → 21.5 mm |
| Main stack | 30×30 mm (M3) or 20×20 mm (M3) |
| Rear stack | 20×20 mm or 25.5×25.5 mm |
| Motor mounting | 16 mm / 19 mm |
| Battery cells | 4S → 6S+ |
| Battery zone | +140 mm (high-capacity packs) |
| Cam mounting | DJI 20 mm · Micro · Nano |
| Cam tilt | 0° → 40° adjustable |
| Design version | V1.1.1 (O4 Pro support) |
Available TPU parts
Official JeNo 7 TPU kit (STL files provided):
- •DJI O3 antenna mount
- •Dual SMA antenna mount
- •50V capacitor mount + spike absorber
- •Rear bumper + RX antenna mount
- •Front RX antenna mount
- •Arm protection with skid (6 mm + 8 mm)
STL files available on Printables. Community remixes available: JeNo 7 BBL (RanxFPV), Freestyle Bash Edition, complete TPU sets by Jean-Lil and BinaryWhite.
Resources
Documented open-source project. Carbon files, assembly PDF, reviews:
