JeNo 5.1″ V1.5.1 Classic
Le 5.1" de référence. Bottom plate 2.5 mm, bras 6 mm Classic, équilibre parfait entre rigidité et réactivité. Pensé pour tous les styles de vol : freestyle, cruising, cinematic. Compatible DJI O4 Pro dès la v1.5.1.
Le 5.1" de référence
La Classic, c'est celle qu'on recommande en premier. Assez rigide pour encaisser le freestyle agressif, assez légère pour la précision race, avec le juste ratio épaisseur / poids. Si tu hésites entre les variantes : prends la Classic, tu ne seras jamais pris en défaut. La version V1.5.1 ajoute le support complet des Air Unit DJI O4 Pro.
Conçu par WE are FPV
Open-source community · Designed in FranceUn frame, tous les styles
Freestyle
Dips, powerloops, rolls. La géométrie Wide-X et le 2.5 mm offrent le flex idéal pour les tricks exigeants.
Cinematic
Cam plate softmount + Gyroflow. Plans stabilisés au pixel près, FOV clear, aucune hélice visible.
Tout-terrain
Parcs, bandos légers, extérieur. Le juste milieu entre rigidité freestyle et légèreté race — il s'adapte.
Positionnement dans la gamme JeNo 5.1
| Variante | Bottom | Arms | Poids | Usage |
|---|---|---|---|---|
| Classic (cette page) | 2.5 mm | 6 mm Classic | 125-135 g | Polyvalent freestyle + cruising |
| Bando | 3 mm | 6 mm renforcés | 140-145 g | Crash-proof, bando agressif |
| Light | 2.5 mm | Light | ~120 g | Ultra-léger, race |
| Cinematic | 2.5 mm | Allongés | 130-140 g | 0 hélice visible, stabilisé |
Disponible avec plusieurs cam plates : Classic (freestyle), Lightweight, Cinematic ou High-Tilt 40° pour le long range. Et plusieurs types de bras au choix : Classic, Modus, Rabbit.
Spécifications techniques
| Taille hélices | 5.1" (option 6") |
| Géométrie | Wide-X, cam cage inclinable |
| Bottom plate | 2.5 mm |
| Middle plate | 2.5 mm |
| Top plate | 2 mm |
| Arms | 6 mm Classic (avec trous d'allègement) |
| Body height | 30 mm |
| Stack height | 21.5 mm |
| Montage moteurs | 16×16 mm / 19×19 mm |
| Moteurs recommandés | 2205-2207 · 1900-2750 KV |
| Batterie | 4S 850-1300 mAh / 6S 650-1100 mAh |
| Passage batterie | XT60 avant + arrière + sangle |
| Cam mounting | DJI 20 mm · Micro · Nano |
| Cam tilt | 0° → 40° réglable |
| Version design | V1.5.1 (support DJI O4 Pro) |
Pièces TPU disponibles
Kit TPU complet (fichiers STL fournis, à imprimer) :
- •Pare-chocs avant / arrière
- •Supports antennes VTX (dual antenna)
- •Protection bras Classic / Modus / Rabbit
- •Mounts action cam (DJI Action 2, GoPro, Osmo Nano)
- •Softmount caméra (cinematic)
- •Cam plate high-tilt 40°
STL téléchargeables sur Printables. On peut aussi les imprimer sur-mesure (voir section Impression 3D).
Ressources
Projet open-source documenté. Fichiers carbone, PDF montage, reviews vidéo :
The benchmark 5.1". 2.5mm bottom plate, 6mm Classic arms, perfect balance between rigidity and responsiveness. Designed for every flying style: freestyle, cruising, cinematic. DJI O4 Pro compatible from v1.5.1 onwards.
The benchmark 5.1"
The Classic is the one we recommend first. Rigid enough to absorb aggressive freestyle, light enough for race-grade precision, with the ideal thickness-to-weight ratio. If you hesitate between variants: get the Classic, you'll never be caught off guard. Version V1.5.1 adds full support for the DJI O4 Pro Air Unit.
Designed by WE are FPV
Open-source community · Designed in FranceOne frame, every style
Freestyle
Dips, powerloops, rolls. The Wide-X geometry and 2.5mm plate deliver the ideal flex for demanding tricks.
Cinematic
Softmount cam plate + Gyroflow. Pixel-perfect stabilized shots, FOV clear, no propeller visible.
All-terrain
Parks, light bandos, outdoor. The sweet spot between freestyle rigidity and race lightness — it adapts.
Position within the JeNo 5.1 lineup
| Variant | Bottom | Arms | Weight | Usage |
|---|---|---|---|---|
| Classic (this page) | 2.5 mm | 6 mm Classic | 125-135 g | All-round freestyle + cruising |
| Bando | 3 mm | 6 mm reinforced | 140-145 g | Crash-proof, aggressive bando |
| Light | 2.5 mm | Light | ~120 g | Ultra-light, race |
| Cinematic | 2.5 mm | Extended | 130-140 g | 0 prop visible, stabilized |
Available with multiple cam plates: Classic (freestyle), Lightweight, Cinematic or High-Tilt 40° for long range. And several arm types to choose from: Classic, Modus, Rabbit.
Technical specifications
| Prop size | 5.1" (6" option) |
| Geometry | Wide-X, tiltable cam cage |
| Bottom plate | 2.5 mm |
| Middle plate | 2.5 mm |
| Top plate | 2 mm |
| Arms | 6 mm Classic (with lightening holes) |
| Body height | 30 mm |
| Stack height | 21.5 mm |
| Motor mounting | 16×16 mm / 19×19 mm |
| Recommended motors | 2205-2207 · 1900-2750 KV |
| Battery | 4S 850-1300 mAh / 6S 650-1100 mAh |
| Battery routing | XT60 front + rear + strap |
| Cam mounting | DJI 20 mm · Micro · Nano |
| Cam tilt | 0° → 40° adjustable |
| Design version | V1.5.1 (DJI O4 Pro support) |
Available TPU parts
Complete TPU kit (STL files provided, to print):
- •Front / rear bumpers
- •VTX antenna mounts (dual antenna)
- •Arm protectors Classic / Modus / Rabbit
- •Action cam mounts (DJI Action 2, GoPro, Osmo Nano)
- •Camera softmount (cinematic)
- •High-tilt 40° cam plate
STL files downloadable from Printables. We can also print them custom for you (see 3D Printing section).
Resources
Documented open-source project. Carbon files, assembly PDF, video reviews:
